Summary
ChiroPulse requires the video display settings of 800x600 or higher (at 96dpi small fonts)
If you cannot see the bottom row of buttons.
- Those running 640x480 will not be able to see the entire ChiroPulse program, as portions of the window will be missing.
To check or change your display from Windows open the Control Panel "Display" shortcut
- Start Menu -> Settings -> Control Panel -> Display
In the "Display Properties windows, click the "Settings" tab:
- Set Desktop Area to "800x600 or higher
- Ensure "Font Size" is set at "Small Fonts 96dpi"
When you launch ChiroPulse under VGA resolution (640x480) you will be "missing" part of the window. The Schedule tab for example will expand beyond the screen and you will be missing items such as the lower push buttons and right side scrollbars.
See the picture below for an example. This will be viewable on 800x600 or higher displays..
Start Menu -> Settings -> Control Panel -> Display
Select "Desktop Area" 800x600 or higher
and Font Size "Small Fonts".
Then press OK
If prompted Press as above, press OK to proceed to
the Test mode. This will ensure the display
settings are compatible.
The Video display might blank for 5 seconds and flash on.
If the test pattern was clear
press OK to return to Windows
